Seadoo Drive Shaft Seal. The pto cover gasket is another story. Changes to the driveshaft, bellows and circlip in 2021. this seadoo drive shaft carbone seal rebuild kit is compatible with the models listed below. replaced the drive shaft, wear ring and put a new solas prop on. the problem started when i put the seadoo in the water after a two year shore leave and i planned to lube. interesting.really all that needs to be done when replacing the carbon seal is pulling the pump and driveshaft. i've been doing some reading here and from what i've learned i think there is a carbon seal around the shaft that. Tested for consistent quality and meets or exceeds original. i would try to loosen the cover and try to squeeze thru the seals along drive shaft and try not to damage them. I made sure to align the wear ring in its proper spot and greased the inside so.
from www.seadoosource.com
interesting.really all that needs to be done when replacing the carbon seal is pulling the pump and driveshaft. The pto cover gasket is another story. I made sure to align the wear ring in its proper spot and greased the inside so. replaced the drive shaft, wear ring and put a new solas prop on. the problem started when i put the seadoo in the water after a two year shore leave and i planned to lube. i've been doing some reading here and from what i've learned i think there is a carbon seal around the shaft that. i would try to loosen the cover and try to squeeze thru the seals along drive shaft and try not to damage them. Changes to the driveshaft, bellows and circlip in 2021. Tested for consistent quality and meets or exceeds original. this seadoo drive shaft carbone seal rebuild kit is compatible with the models listed below.
New Sea Doo Driveshaft Seal Assemblies
Seadoo Drive Shaft Seal i've been doing some reading here and from what i've learned i think there is a carbon seal around the shaft that. Tested for consistent quality and meets or exceeds original. this seadoo drive shaft carbone seal rebuild kit is compatible with the models listed below. i've been doing some reading here and from what i've learned i think there is a carbon seal around the shaft that. I made sure to align the wear ring in its proper spot and greased the inside so. Changes to the driveshaft, bellows and circlip in 2021. replaced the drive shaft, wear ring and put a new solas prop on. interesting.really all that needs to be done when replacing the carbon seal is pulling the pump and driveshaft. the problem started when i put the seadoo in the water after a two year shore leave and i planned to lube. The pto cover gasket is another story. i would try to loosen the cover and try to squeeze thru the seals along drive shaft and try not to damage them.
